|
|
 |
|
CTM Accessories
CTM-100/C Accessories
Cable, Unbalanced CDI & BNC, CTM‑100/C
30‑inch RG‑174 cables terminated with a Male DB50 connector on one end and with one (1) UG‑1870/U (CX‑11230) and one (1) BNC Female connector at the other end. |
#PAQ3700 |
|
Cable, Multipurpose, CTM‑100/C
A 30‑inch cable terminated with a Male DB50 connector on one end and with one (1) UG‑1870/U (CX‑11230) and one (1) BNC Female connector at the other end. Also at the same end (opposite the DB50) are two (2) Female DB25 connectors. |
#PAQ3705 |
|
Panel, Multipurpose, CTM‑100/C
Metal panel, 4.2‑inch wide by 4.5‑inch high, with the following connectors:
‑ one (1) UG‑1870/U (CX‑11230),
‑ one (1) BNC Female connector and
‑ two (2) Female DB25 connectors.
A Male DB50 connector provides the interface to the modem. This panel also has a punch‑out space for installation of either a TFOCA I or TFOCA II Jam Nut Cable (fiber cable must be ordered separately).
For THSDN Applications Only.
|
#PAQ3720 |
|
F/O Cable, ST to TFOCA I Plug, CTM‑100
48‑inch TFOCA I Fiber Optic cable that is used to directly connect to reels of TFOCA I cable. The cable connects to the modem via two (2) Male ST connectors. |
#PAQ3750 |
|
F/O Cable, ST to TFOCA II Plug, CTM‑100/C
48‑inch TFOCA II Fiber Optic cable that is used to directly connect to reels of TFOCA II cable. The cable connects to the modem via four (4) Male ST connectors. |
#PAQ3755 |
|
F/O Cable, ST to TFOCA I Jam Nut, CTM‑100/C
48‑inch TFOCA I Fiber Optic cable that attaches to the PAQ3720 panel via the Jam Nut. The cable connects to the modem via two (2) Male ST connectors. |
#PAQ3760 |
|
F/O Cable, ST to TFOCA II Jam Nut, CTM‑100/C
48‑inch TFOCA II Fiber Optic cable that attaches to the PAQ3720 panel via the Jam Nut. The cable connects to the modem via four (4) Male ST connectors. |
#PAQ3765 |
|
Rack Mount Shelf, CTM‑100/C
Metal 1U rack shelf used for rack mounting one or two (side‑by‑side) CTM‑100/C's. The ‑00 comes with fixed support brackets while the ‑22 utilizes 22‑inch slides. |
#PAQ3110‑00 / #PAQ3110‑22 |
|
Patch Panel Frame, 4 Blank Positions
Four (4) position metal frame, 19 inches wide by 5.22‑inches high used for mounting the PAA200028 and the PAQ3720 panels. |
#PAA200030 |
|
Blank Panel (Four Panels Shown)
One (1) Solid metal panel, 4.2‑inches wide by 4.5‑inches high used to fill any empty spaces remaining on the PAA200030 Patch Panel Frame. |
#PAA200023 |
|
CTM-100/B Accessories
Cable, DB‑9 to CX‑11230
30‑inch RG‑174 cables terminated at one end with an UG‑1870/U (CX‑11230) and with a DB‑9 Female connector at the other end. |
#PAQ1730 |
|
Unbalanced CDI Interface Panel, 2 Ports (DB9)
Metal panel, 4.2‑inch wide by 4.5‑inch high, with two (2) UG‑1837/U (CX‑11230) connectors mounted on the panel. The panel is linked via RG‑174 cables and attaches to the modem via a Female DB‑9. |
#PAQ1720 |
|
Balanced / Unbalanced CDI Interface Panel
Metal panel, 4.2‑inch wide by 4.5‑inch high, with one (1) UG‑1837/U (CX‑11230) connector and four (4) binding posts mounted on the panel. For unbalanced CDI, the panel is linked via RG‑174/U cable and attaches to the modem via a Female DB9. For balanced CDI, the panel is linked via two (2) 1‑pair shielded cables and attaches to the modem via the above Female DB9 connector. |
#PAQ1715 |
|
Rack Mount Shelf, CTM‑100/A & B
Metal 1U shelf used for rack mounting one or two (side‑by‑side) CTM‑100/A's and/or CTM‑100/B's. The ‑00 comes with fixed support brackets while the ‑22 utilizes 22‑inch slides. |
#PAQ2110‑00 / #PAQ2110‑22 |
|
Patch Panel Frame, 4 Blank Positions
Four (4) position metal frame, 19‑inches wide by 5.22‑inches high used for mounting the PAQ1720, PAQ1715 and the PAA200023 panels. |
#PAA200030 |
|
Blank Panel (Four Panels Shown)
Solid metal panel, 4.2‑inches wide by 4.5‑inches high used to fill any empty spaces remaining on the PAA200030 Patch Panel Frame. |
#PAA200023 |
|
CTM-100 Accessories
Cable, SMA to CX‑11230
22‑inch RG‑174 cables terminated with an UG‑1870/U (CX‑11230) connector at one end and with SMA male connectors at the other end. |
#PAQ1700 |
|
Unbalanced CDI Interface Panel, 2 Ports (SMA)
Metal panel, 4.2‑inch wide by 4.5‑inch high, with two (2) UG‑1837/U (CX‑11230) connectors mounted on the panel. The panel is linked via RG‑316/U cables and attaches to the modem via a male SMA. |
#PAA200028 |
|
Assembly, High Pass In‑Line Filter, 1 Port
Filters out "order wire" generated noise that affects errors at data rates of 4 mb/s and above. |
#PAQ1705 |
|
Rack Mount Shelf, CTM‑100/A & B
Metal 1U shelf used for rack mounting one or two (side‑by‑side) CTM‑100/A's and/or CTM‑100/B's. The ‑00 comes with fixed support brackets while the ‑22 utilizes 22‑inch slides. |
#PAQ2110‑00 / #PAQ2110‑22 |
|
Patch Panel Frame, 4 Blank Positions
Four (4) position metal frame, 19‑inches wide by 5.22‑inches high used for mounting the PAA200028 and the PAA200023 panels. |
#PAA200030 |
|
Blank Panel (Four Panels Shown)
Solid metal panel, 4.2‑inches wide by 4.5‑inches high used to fill any empty spaces remaining on the PAA200030 Patch Panel Frame. |
#PAA200023 |
|
Software Packages
BASIC Software Package
Basic NRZ/CDI Optical Software Package #PAQ3000
Included with initial CTM‑100/C equipment purchase. Supports the following rates: 8, 16, 32, 72, 64 Kb/s Balanced CDI, 72, 96, 112, 128, 144, 192, 224, 256, 288, 320, 384, 448, 512, 576, 640, 768, 960, 1024, 1152, 1344, 1536, 1544, 1920, 2048, 2304, 2560, 3088, 3584, 4096, & 4608 Kb/s Unbalanced CDI.
Supports Fiber Optical data rates of 72Kb/s to 16 Mb/s at 8 Kb/s steps. Supports NRZ input and external clock sources 1/5 MHz GPS.
|
|
FIBER Software Packages
CV‑8448 Software Package #S.W.A
*In addition to the features supported in the Basic Package, this package supports fiber interoperability with the DNE CV‑8448.
Orderwire Software Package #S.W.B
*In addition to the features supported in the Basic Package, this package supports MD‑1272/G order wire.
|
|
MULTIPLEXER Software Packages
THSDN Interoperability Software Package #S.W.C
*In addition to the features supported in the Basic Package, this package supports the breakout of a THSDN DTG from an EETGMOW CCA into two aggregates; one data aggregate and one voice aggregate. Voice Data Rates supported are: 128, 256, and 512 Kb/s.
2‑Port Multiplexer Software Package #S.W.D
*In addition to the features supported in the Basic Package, this package supports the input of two aggregates (combined data rate not to exceed 8 mbps) that will be combined into a user selectable output: NRZ, Fiber, or CDI (CDI not to exceed 4608 Kb/s).
|
|
|
|
|
